Bin Aeration and Particulate Transmitter

Bin Aeration and Particulate Transmitter

various models, like evassers, airpads, pneumatic piston vibrators, etc., Transmitter for particulate emission

Bin Aeration and Particulate Transmitter

TM-PMT2

The Series TM-PMT2 Particulate Transmitter is designed to measure particulate emission levels from dust collector discharge. Using DC coupled electrostatic induction sensing technology, the transmitter monitors a pA current that is generated as particulate passes near the probe; a 4 to 20 mA signal will vary based on the particulate level.

TM-MM-AP

rectangular air pad bin aerator is an aeration device used to promote the flow of dry bulk powders from a storage vessel, temperature range up to 300°C

TM-MM-EV

the evasser is a device used to promote the flow of dry bulk powders from a storage vessel without the noise and damaging vibration caused by pneumatic or electric vibrators.

TMN-FD

Fluidizer Disk combines aeration and vibration to solve the most difficult bulk solid flow applications. The special design creates a vibration as the air flows between the pads boot and bin wall. This provides a very effective flow aid for all types of dry products. Your pneumatic system pressure can range from 29 to 87 psi

TMN-MFD

Fluidizer Disk combines aeration and vibration to solve the most difficult bulk solid flow applications. The micro disk is half the size of standard disk, capable of fitting into tight locations. The special design creates a vibration as the air flows between the pads boot and bin wall. This provides a very effective flow aid for all types of dry products. Your pneumatic system pressure can range from 29 to 87 psi

TMN-BPV

The special aluminum body is equipped with a roller and ring with multi-nozzles. It is tightly closed by plastic side covers. Vibration is caused when the roller pushed by compressed air runs in a rotary motion to produce centrifugal force

TMN-PRV

Series TMN-PRV Pneumatic Roller Vibrators have a high vibration frequency feature that can prevent material jams in pipe delivery. It can also be applied for bridge-break or concrete injection operation conditions. The special aluminum body is equipped with a roller and ring with multi-nozzles. It is tightly closed by plastic side covers. Vibration is caused when the roller pushed by compressed air runs in a rotary motion to produce centrifugal force.

TMN-PTV

Series TMN-PTV Pneumatic Turbine Vibrators are the best choice of high vibration frequency types for a low noise environment. It is usually installed on a vibrating separator, conveyor, automatic arrangement machine, packing machine, or filling machine. The vibration is produced by centrifugal force which arises from the imbalance of movement when compressed air impacts the tangent of the turbine to make it move. The operation noise is low because of ball bearing supports on the running turbine.