Humidity, condensation, light level, occupancy

Humidity, condensation, light level, occupancy

Room and duct monitoring

Feuchtetransmitter

TM-KLH100

TM-KLH 100 is a room humidity and temperature transmitter. C.

TM-KLH-M

TM-KLH-M is a combined relative humidity and temperature transmitter made for indoor measuring. Outputs are available via Modbus but also as linear 0...10 Vdc signals.

TM-KLK100

TM-KLK 100 duct humidity transmitters are designed for detecting humidity and temperature inside ventilation ducts.

TM-KLHJ100

TM-KLHJ 100 transmitters are designed for detecting relative humidity and temperature. The probe cable length is 2 m.

TM-KLU100

TM-KLU 100 and TM-KLU 100-N, humidity and temperature transmitters for outdoor applications.

Light Level, Occupancy Sensors, Pir Detectors

TM-LUX24

TM-LUX 24 is made for detecting light level in room spaces.

TM-LUX34

TM-LUX 34 is made for detecting outdoor light level and temperature. Measure signals can be used for controlling lighting and heating. The range of 0...1000 lx or 0...10000 lx can be chosen by the installer.

TM-PLT12

The TM-PLT12 is a detector for monitoring occupancy through body heat and movements. The detector is passive infrared (PIR) which reacts to temperature changes in range of detection beams.

TM-PLT24

The TM-PLT24 is a detector for monitoring occupancy through body heat and movements. The detector is passive infrared (PIR) which reacts to temperature changes in range of detection beams.

TM-LA14

The TM-LA14 is an occupancy sensor for controlling ventilation and lighting. Intelligent, processor based, logic prevent false functions being at the same time very sensible. Relay function is quiet and the release delay is adjustable.

TM-LA15

The TM-LA15 is an occupancy sensor for controlling lighting. Up to 1,5 A continuous fluorescent lighting load is allowed.

Condensation Switch

TM-KA10

Condensation switch TM-KA 10 is designed for detecting water condensation in cooling systems, for example in cooling beams. With the condensation switch it is possible to control the cooling water supply when the water starts to condensate on the pipe.

Wind sensors

TM-UV7-LY

The TM-UV7 ultrasonic wind sensor is designed for building automation needs of the wind direction and speed measurement.

TM-VH 1000

The TM-VH 1000 wind speed sensor is designed for building automation needs of the wind speed measurement.

TM-VS 3000

The TM-VS 3000 wind sensor is designed for building automation needs of the wind direction and speed measurement.