Level Transmitter

Level Transmitter

Ultrasonic, hydrostatic or float type models available, for liquids, smart transmitter with ATEX approval, float type transmitter with IECEx-approval available

Level Transmitter with floats

TM-DEE-DCS

The Capacitive Sensor TM-DEE-DCS is a reliable alternative to our range of float switches, specifically designed for use in cryogenic applications and other non-conductive liquids. With no moving parts, accurate level measurement takes place within the custom length hollow probe. The open ended probe allows liquid to flow in and out from the bottom of the sensor where turbulence is at a minimum, making it ideal for use in fast flowing or turbulent applications.

Features Include:
– Microprocessor Based Pulse – Counting Technology
– Probe Lengths can be made to measure to suit specific applications – maximum 6m
– Suitable for non-conductive liquids only.
– Easy Push Button Set-up of Span and Zero Points.
– Zero-low maintenance required.
– Soon to be available with ATEX/ IECEx Ia certification

 

TM-DEE-LVCSi

The LVCSi is an analogue vertical level sensor with an integrated display meter and output driver specifically designed for continuous, in-situ monitoring of your tank. It is an extension of Deeter Electronics’ range of LVCS analogue level sensors and includes a temperature sensing option.

LVCSi features include:

A display for direct read-out of level and temperature
Two pairs of analogue outputs (4-20mA and 0-10V)
Two digital outputs (set point)
An RS485 communications port
IP rating of IP68
Stem lengths up to 2000mm
Temperature sensing option available
Modbus optional

TM-DEE-LVCSi-FP

The TM-DEE-LVCSi FP is an analogue vertical liquid level sensor with an integrated display meter and output driver specifically designed for continuous, in-situ monitoring of your tank while in a potentially explosive atmosphere. With optional temperature sensing and MODBUS communications protocols, the LVCSi-FP is an all-in-one ATEX/ IECEx solution for liquid level monitoring.

LVCSi features include:

ATEX and IECEx approved
Suitable for gas and dust environments
A display for direct read-out of level and temperature
Temperature sense range up to +120C
Two pairs of analogue outputs (4-20mA and 0-10V)
Two set point digital outputs
An RS485 communications port
Reed switch or Hall Effect sensing technology.
IP Rating of IP68
Stem Lengths up to 6m
Custom mounting options available.
Stainless steel 316L wetted components
Optional Modbus
Can be specified for process temperatures down to -55°C

 

TM-DEE-LVCS-FP

The Deeter LVCS FP is a magnetic float on a reed switch or Hall Effect sensor stem for control and indication of a liquid level while in a potentially explosive atmosphere.

Features include:
ATEX and IECEx approved.
Standard lengths or custom length sensor stems up to 6 Metres.
Stainless steel 316L housing and wetted components.
Suitable for gas and dust environments.
IP68 Ingress protection.
Reed switch or Hall Effect sensing technology.
Voltage and current loop analogue output.
Factory programmable set point triggers available.
M20 and ½”NPT cable connections.
Custom mounting options available.
Narrow sensor stem and mounting for tanks without internal access.
Suitable for high liquid temperatures.

TM-DEE-LVCS-HE

The LVCS HE is a liquid level sensor with a loop-powered 4-20mA output.
The LVCS HE has one moving part; a stainless steel float, which passes over sensors in a stainless steel stem with a sensing resolution of 15mm It is designed to fit into a 21mm hole in the top of a tank, secured by an aluminium head. The standard head has a ½ inch BSP thread, for other threads or for fitting to pressured tanks, please call the sales office.
All fittings inside the tank are made from stainless steel 316L and are welded to make a tough and durable sensor. The LVCS is therefore ideally suited for use in food and  petrochemical applications, and for use in harsh environments.
Custom lengths can be made to order – call our sales office to discuss your requirements. We will consider custom lengths, process connections and other resolutions.

TM-DEE-LVCS

The LVCS is a liquid level sensor featuring a float that can move vertically along a stem. Sensors in the stem detect small step-changes in level and, particularly over longer lengths, the output approximates to a continuous analogue signal.
The following range of analogue outputs are supplied as standard: 0-2V, 0-4V, 0-10V and the industrial standard 4-20mA current loop.
The standard LVCS is designed to fit a 21mm hole in the top of a tank, secured by an aluminium head, and has a ½ inch BSP thread. Sensing resolution is 5mm with measuring lengths of 250mm, 500mm, 750mm and 1m.
All fittings inside the tank are made from stainless steel 316L and are welded to make a tough and durable sensor. The LVCS is therefore ideally suited for use in food and petrochemical applications, and for use in harsh environments. It also has an IP rating of IP67.

Hydrostatic Level Transmitter

TM-SGE-16/25

  • Any measurement range from 1 up to 500 m H2O
  • Integrated internal overvoltage protection circuit
  • Marine certificate DNV
  • ATEX Intrinsic safety

TM-SGE-25S/C

  • Any measurement range from 2 up to 20 m H2O
  • Integrated internal overvoltage protection circuit
  • ATEX Intrinsic safety
  • Marine certificate DNV

TM-SGE.Smart

  • Programmable zero shift, range and damping ratio
  • 4...20 mA output signal + HART protocol
  • Accuracy 0.1%
  • Integrated internal overvoltage protection circuit
  • ATEX Intrinsic safety
  • Special version with Titanium wetted parts ( SGE-25S.Smart)
  • Marine certificate DNV

TM-SGE 25H

  • All wetted parts made in Hastelloy
  • Any measurement range from 2 up to 20 m H2O
  • Integrated internal overvoltage protection circuit
  • Marine certificate

TM-PCE-28P

  • Any measuring range from 0…200 to 0…3000 mm H2O
  • ATEX Intrinsic safety (version PCE-28P only)
  • Smart version – with Hart protocol (version APC-2000ALW/P only)
  • Marine certificate - DNV, BV (version PCE-28P only)

TM-APC2000

  • Programmable zero shift, range and damping ratio
  • 4...20 mA output signal + HART protocol
  • Accuracy 0,16%
  • Local display
  • Intrinsic safety certificate (ATEX, IECEx)

Ultrasonic Level Transmitter

TMN-ULT

Series TMN-ULT Ultrasonic Level Transmitter provides reliable, accurate, non-contact measurement of liquid levels. Ultrasonic non-contact technology offers no moving parts to wear, jam, corrode, or get coated like contact technologies. Mapping software makes effective measuring surface only a 3" diameter column. No concerns with ladders, pipes, or other tank intrusions in the remaining sound cone.

TMN-UL

The Model TMN-UL Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for short range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSS has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSS can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit.