Modbus and BACnet Products

Modbus and BACnet Products

Sensors, controllers, modules, etc.

Pressure / Differential Pressure, VAV

TMP-MS2-MC

Magnesense, for air and non-corrosive gases, ranges from 0-25 Pa to 0-100 Pa and 0-200 Pa to 0-1250 Pa, field selectable, 4-20 mA or 0-10 VDC output signal, high accuracy through Hall sensor, digital push buttons for zero and span, factory default could easily restore, various kinds of mounting, optional Modbus or BacNet version

TM-PEL-M

TM-PEL - differential pressure transmitters are made for clean / isolation room applications. The zero point of the transmitter remains exact by means of the automatic zeroing, eliminating regularly possible zero point drifting.

TM-PEL-8K-M

TM-PEL 8K is a pressure transmitter detecting pressures and pressure differences of the air-handling system. Excellent accuracy of the measurement is guaranteed by the automatic zero point calibration. The proper range of measuring can be chosen at commissioning from eight different ranges, Option: Modbus RTU

TM-PEL2500-M

TM-PEL 2500 is a pressure transmitter detecting pressures and pressure differences of the air-handling system. Pressure- or flow linear output can be selected at the commissioning. Excellent accuracy of the measurement is guaranteed by the automatic zero point calibration. The proper range of measuring can be chosen at commissioning from eight different ranges

TM-PEL1000-M

TM-PEL 1000 differential pressure transmitters are made for controlling fans and monitoring filters of the air handling units (AHU). Model PEL 1000-N has a built-in digital display with the resolution of 1Pa.

TM-KPEL-M

TM-KPEL-M is a pressure transmitter for detecting pressures and pressure differences of the air-handling system. The device can be connected to any system that supports Modbus RTU protocol. The transmitter has two separate temperature compensated pressure measurements. The pressure range can be selected separately for both measurements. The transmitter can also be used as a controller. The controller settings can be changed by using the ML-SER tool or via Modbus. The transmitter outputs can also be changed to inputs which can be read via Modbus. The inputs can be selected to be 0-10 V, digital or temperature inputs. The supported temperature elements are NTC 10, NTC 20, Pt1000, Ni1000 and Ni1000-LG.

TM-KPEL-9K-M

TM-KPEL-9K-M is a pressure transmitter for detecting pressures and pressure differences of the air-handling system. The device can be connected to any system that supports Modbus RTU protocol. The transmitter has two separate temperature compensated pressure measurements. The pressure range can be selected separately for both measurements. The transmitter can also be used as a controller. The controller settings can be changed by using the ML-SER tool or via Modbus. The transmitter outputs can also be changed to inputs which can be read via Modbus. The inputs can be selected to be 0-10 V, digital or temperature inputs. The supported temperature elements are NTC 10, NTC 20, Pt1000, Ni1000 and Ni1000-LG.

TM-IML-M

TM-IML is made for detecting and controlling air volumes in air handling units and room spaces. The transmitter includes versatile preset settings for most common fan models and a common formula for air flow volume. Excellent accuracy of the measurement is guaranteed by the automatic zero point calibration. The proper range of measuring can be chosen at commissioning from four different ranges.

Humidity, Concentration, Air Quality

TM-KLH-M

TM-KLH-M is a combined relative humidity and temperature transmitter made for indoor measuring. Outputs are available via Modbus but also as linear 0...10 Vdc signals.

TM-HDH-M

TM-HDH-M and HDH-M-N transmitters with a Modbus communication are designed to detect carbon dioxide concentration and temperature in the climate zone. ABCLogic self-calibration method eliminates the possible long term drift. The controller settings, modbus settings and options' limits can be changed by using the ML-SER tool.

TM-HDK-M

TM-HDKM and TM-HDKM-N transmitters have been designed for detecting CO2 and temperature inside the ventilation ducts. The zero point of CO2-sensor will be calibrated regularly by the ABCLogic function. Output: 0-10 VDC and Modbus RTU

TM-HDK-10K-M

TM-HDK-10K and TM-HDK-10K-N transmitters have been designed for detecting CO2 and temperature inside the ventilation ducts. The zero point of CO2-sensor will be calibrated regularly by the ABCLogic function. Range: 0-10.000 ppm. Output: 0-10 VDC and Modbus RTU

TM-HDU-M

TM-HDU and TM-HDU-N transmitters are designed to detect carbon dioxide concentration and temperature inside the unheated spaces like parking halls. The CO2 sensor will become self-calibrated regularly by using patented ABCLogic method. Ouptut: Modbus RTU, 0-10 VDC

TM-HDU-5K-M

TM-HDU-5K-M and TM-HDU-5K-M-N transmitters are designed to detect carbon dioxide concentration and temperature inside the unheated spaces like parking halls. The CO2 sensor will become self-calibrated regularly by using patented ABCLogic method. Ouptut: Modbus RTU, 0-10 VDC

TM-ILH-M

TM-ILH transmitters are designed for detecting and controlling VOC (Volatile Organic Compound) level and temperature in dry room spaces. MEMS sensing technology ensures accurate and durable VOC measurement that is related to the CO2level. With the VOC level information the demand based ventilation can be controlled effectively.With Modbus RTU.

TM-ILK-M

TM-ILK-M transmitters are designed for detecting and controlling VOC (Volatile Organic Compound) level and temperature in ventilation ducts. MEMS sensing technology ensures accurate and durable VOC measurement that is related to the CO2level. With the VOC level information the demand based ventilation can be controlled effectively.With Modbus RTU.

Temperature Transducer

TM-TEAT-M

TM-TEAT-M temperature transmitters are especially designed for detecting the temperature of heating water. Transmitters are always installed in a pocket of stainless steel (AT80), brass (ATM80) or acid-proof steel (ATH 80). Transmitter's settings can be changed by using the ML-SER tool.

TM-TENA-M

TM-TENA-M temperature transmitters are especially designed for hot domestic water temperature control applications, with fast response time. Transmitter's settings can be changed by using the ML-SER tool. Output signal: 0-10 VDC or Modbus communication

TM-TEK-M

TM-TEK-M temperature transmitters are designed for automatic ventilation systems to measure duct temperatures. Transmitter information can be used to control other devices in the HVAC system. Output signal: 0-10 vDC or Modbus RTU. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEKV-M

TM-TEKV-M temperature transmitters are especially designed for hot domestic water temperature control applications, with fast response time. Transmitter's settings can be changed by using the ML-SER tool. Output signal: 0-10 VDC or Modbus communication

TM-TEP-M

TM-TEP-M temperature transmitters are designed for pipe strap-on installations, for heating and cooling applications. Sensor is mounted on the pipe by means of an adjustable tie. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEKA-M

TM-TEKA-M temperature transmitters are made for detecting the average temperature in a large air duct. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEKA-M-500

TM-TEKA-LU-500 temperature transmitters are made for detecting the average temperature in a large air duct. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEHR-M

TM-TEHR-M temperature sensors are temperature transmitter for dry room spaces with Modbus communication

Temperature / Universal Controller

TM-HLS44

TM-HLS 44 is an advanced multifunctional controller specifically designed for individual room temperature and zone control applications. Controller has a built-in, galvanic isolated RS-485 channel for communication via Modbus and it can be connected to any supervisory Modbus RTU software / system.

TM-HLS45

TM-HLS 45 is a versatile room controller for individual room temperature and VAV control applications. The TM-HLS45 is excellent for both 2-pipe FCU and floor heating and cooling applications. The controller has a galvanically isolated RS-485 connection for Modbus RTU communication.

TM-HS2.2-M

TM-HS 2.2-M is a universal Modbus controller designed for HVAC applications. It can be used for controlling e.g. pressure, differential pressure, temperature or illumination level. Display is possible to scale according to the measurement.

TM-PDS2.2

TM-PDS 2.2 is a universal controller can be used for controlling e.g. pressure, humidity or temperature. The controller supports 0-10 VDC controlle, 3-point controlled or thermal actuators. Configuration, settings and monitoring can be made by using disply and push buttons. The controller has RS-485 connection for Modbus RTU communication.

I/O Modules

TM-MIO12-V

TM-MIO 12-V is an I/O module for Modbus that reads four analogue inputs (0-10 VDC) or four digital inputs. Each individual input can be set to work as an analogue or digital input. The module can control thermal or 3-point actuators and also four 0-10 VDC analogue outputs.

TM-MIO12-Pt

TM-MIO 12-Pt is an I/O module for Modbus that reads four Pt1000 inputs or four digital inputs. Each individual input can be set to work as an analogue or digital input. The module can control thermal or 3-point actuators and also four 0-10 VDC analogue outputs.

TM-MIO12-NILG

TM-MIO 12-NILG is an I/O module for Modbus that reads four Ni1000-LG inputs or four digital inputs. Each individual input can be set to work as an analogue or digital input. The module can control thermal or 3-point actuators and also four 0-10 VDC analogue outputs.