Temperature Transmitter 0-10 VDC

Temperature Transmitter 0-10 VDC

active Sensors, with output signal 0-10 VDC

Temperature Transmitter 0-10 VDC

TM-TEAT-LU

TM-TEAT-LU temperature transmitters are especially designed for detecting the temperature of heating water. Transmitters are always installed in a pocket of stainless steel (AT80), brass (ATM80) or acid-proof steel (ATH 80). Transmitter's settings can be changed by using the ML-SER tool.

TM-TENA-LU

TM-TENA temperature transmitters are especially designed for hot domestic water temperature control applications, with fast response time. Transmitter's settings can be changed by using the ML-SER tool. Output signal: 0-10 VDC or Modbus communication

TM-TEK-LU

TM-TEK-LU temperature transmitters are designed for automatic ventilation systems to measure duct temperatures. Transmitter information can be used to control other devices in the HVAC system. Output signal: 0-10 vDC or Modbus RTU. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEKV-LU

TM-TEKV-LU temperature transmitters are especially designed for hot domestic water temperature control applications, with fast response time. Transmitter's settings can be changed by using the ML-SER tool. Output signal: 0-10 VDC or Modbus communication

TM-TEP-LU

TM-TEP temperature transmitters are designed for pipe strap-on installations, for heating and cooling applications. Sensor is mounted on the pipe by means of an adjustable tie. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEPK-LU

TM-TEPK-LU temperature transmitter is designed for measuring heating and cooling water temperatures in HVAC automation systems. The sensor is mounted on the pipe by using the heat resistance cable tie. Pt1000 sensor element resistance information is converted to a 0...10 V signal. The ML-SER commissioning tool can be used to make one point field calibration and to change the temperature output to controller output.

TM-TEKA-LU

TM-TEKA-LU temperature transmitters are made for detecting the average temperature in a large air duct. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEKA-LU-500

TM-TEKA-LU-500 temperature transmitters are made for detecting the average temperature in a large air duct. Transmitter's settings can be changed by using the ML-SER tool.

TM-TEKY4-LU

TM-TEKY4-LU temperature transmitter is designed for cold space temperature measurement in automatic HVAC systems. Pt1000 sensor element resistance information is converted to a 0...10 V signal.

TM-TEKY6-LU

TM-TEKY6-LU temperature transmitter is designed for cold space temperature measurement in automatic HVAC systems. Pt1000 sensor element resistance information is converted to a 0...10 V signal. The ML-SER commissioning tool can be used to make one point field calibration and to change the temperature output to controller output. Silicone cable version TM-TEKY6S-LU is available for more demanding conditions.

TM-TEHR-LU

TM-TEHR-LU temperature sensors are temperature transmitter for dry room spaces. Output signal: 0-10 VDC

TM-TEHR-LU-PU

TM-TEHR-LU-PU temperature sensors are temperature transmitter for dry room spaces. Output signal: 2 x 0-10 VDC

TM-TEHR-M

TM-TEHR-M temperature sensors are temperature transmitter for dry room spaces with Modbus communication

TM-TEU-LU

TM-TEU-LU temperature transmitter are designed for detecting outdoor temperatures.

TM-LK

TM-LK are transmitters for temperature measuring. TM-LLK is a 2-wire transmitter converting the sensor resistance to the 4-20 mA signal. TM-LUK is a 3-wire transmitter converting the sensor signal to the 0-10 VDC signal. The transmitters need a separate Pt1000 or Pt100 sensor.

TM-LTL010

TM-LTL010 is a temperature transmitter, which converts two- or four-wire connected Pt1000 (not included) sensors resistor value to a linear 0 ...10Vdc output. The transmitter has 4 temperature ranges, which can be chosen during the commissioning.